浙江LNG三期项目接收站工程低温工艺球阀（16寸及以上）国际招标公告(1)

中化建国际 对下列产品及服务进行国际公开竞争性招标，于2023-12-04在 公告。本次招标采用电子招标方式，现邀请合格投标人参加投标。1、招标条件项目概况:浙江LNG三期项目接收站工程低温工艺球阀（16寸及以上）资金到位或资金来源落实情况:已落实项目已具备招标条件的说明:已具备2、招标内容招标项目编号:0704-2340JDCP2296招标项目名称:浙江LNG三期项目接收站工程低温工艺球阀（16寸及以上）项目实施地点:中国浙江省招标产品列表(主要设备):

序号	产品名称	数量	简要技术规格	备注
1	低温工艺球阀（16寸及以上）	18 台	详见招标文件	无

3、投标人资格要求投标人应具备的资格或业绩:3. 对投标人的资格和业绩要求：Requirements for Qualification and reference of Bidder: （1）资格要求 Requirements for Qualification of Bidder A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照复印件；如果投标人为境外注册公司，需提供有效的公司登记注册证明；A．The bidder within the customs territory shall provide photocopies of valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate. B．从中华人民共和国关境内制造的货物：投标人只能为投标设备的制造商。For goods manufactured within PRC customs territory: Bidders can only be the manufacturers of the bidding equipment.从中华人民共和国关境外制造的货物:投标人可为投标设备的制造商或授权代理商。For goods manufactured outside PRC customs territory: Bidders can be the manufacturers or Authorized Agents of the bidding equipment. 如果投标人为代理商，投标人应得到所投货物制造商同意其为本次投标提供该货物的合法正式授权书。If the bidder is an agent, bidder shall obtain the legal and formal authorization from the manufacturer of the goods to provide the goods for this bidding. C. 是否接受联合体投标：否Joint Venture: Not AcceptedD. 未领购招标文件是否可以参加投标:不可以Bid without the bidding documents：NOT A/VailableE. 其它others: （2）资质要求及证明文件Requirements of Qualification of Bidder and Certificate 投标人应提供投标产品制造商以下有效认证证书复印件，证书认证的制造商名称应与其所提供业绩的制造商、此次投标货物的制造商一致。The bidder shall provide copies of the type certifications of the manufacturer when bidding. And the name of the certificates shall be the same with the manufacture of References and the manufacture of the bidding Goods. 投标产品国内制造商应在投标时提供TS 证书(特种设备生产许可证)和覆盖投标产品范围【阀门类型（球阀）、温度 (-196℃)、口径及磅级】的 TSX 证书(特种设备型式试验证书)。投标产品国外制造商应和国内制造商同样提供上述证明文件，如投标人在投标时无法提供国外制造商的TS证书，需在投标时提供书面承诺函，承诺内容为: 供货前提供阀门原产地证明和 2024 年 5月 31 前提供 TS 证书 (特种设备生产许可证)，承诺函格式详见附件17。Domestic manufacturers of bidding products should provide a TS certificate (Special Equipment Production License) and a TSX certificate (Special Equipment Type Test Certificate) covering the scope of the bidding product [valve type(ball valve), temperature (-196 ℃), diameter, and scale] when bidding. The foreign manufacturer of the bidding product should provide the same certification documents as the domestic manufacturer. If the bidder is unable to provide the TS certificate of the foreign manufacturer during the bidding process, a written commitment letter must be provided during the bidding process. The commitment content is to provide the certificate of origin of the valve before supply and the TS certificate (special equipment production license) before May 31, 2024. The format of the commitment letter is shown in Annex 17. （3）业绩要求Requirement for Bidder's reference:2010年1月1日至投标截止日（以合同签署时间为准），投标人所投产品的制造商在中国境内应具有至少2个LNG接收站或具有接收站性质的（即满足GB51156-2015液化天然气接收站工程设计规范）调峰站项目(需提供满足GB51156-2015液化天然气接收站工程设计规范2.0.2液化天然气接收站:对船运液化天然气进行接收、储存、气化和外输等作业的场站要素的证明材料,证明材料通过国家发改委、省级发改委、政府网站、项目业主官网等官方网站查询，以加盖公章的截图形式提供）的供货业绩（要求2个项目业绩，同一项目提供多个合同视为一个业绩），且其中至少一个业绩须包含3台16寸及以上且磅级≥CL1500的低温或超低温球阀。From January 1, 2010 to the tender deadline (subject to the contract signing time), The bidder's bid products shall hA/Ve at least two LNG receiving stations in China or hA/Ve the nature of receiving stations (that is, meet the GB51156-2015 LNG receiving station engineering design specifications) Peaking station project (required to meet the GB51156-2015 LNG receiving station engineering design specifications 2.0.2 LNG receiving station: for shipping Certification materials of terminal elements of LNG receiving, storage, gasification and export operations, which can be queried through official websites such as the National Development and Reform Commission, provincial development and Reform Commission, government website, project owner's official website, etc., and provided in the form of screenshots stamped with the official seal (two project performance is required, and multiple contracts provided for the same project shall be regarded as one performance), And at least one of the results must include three 16 inch and above and pound class ≥CL1500 low temperature or ultra-low temperature ball valves.投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同【或】销售订单【框架协议下的订单（需提供主框架协议）】复印件（含相关技术附件）和2）到货验收材料。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、制造商名称、货物名称、项目名称、供货数量、规格型号（口径及磅级）、到货验收材料。如提供的是调峰站业绩，投标人还需提供调峰站（满足GB51156-2015液化天然气接收站工程设计规范2.0.2液化天然气接收站：对船运液化天然气进行接收、储存、气化和外输等作业的场站）要素的证明材料，证明材料通过国家发改委、省级发改委、政府网站、项目业主官网等官方网站查询，以加盖公章的截图形式提供。未提交业绩证明文件，或所提供的业绩证明文件未体现上述信息的，均视为无效业绩。The Bidder shall furnish reference List in given form, and provide corresponding documentary evidence. The documentary evidence shall include but not limited to: 1) copies of sales contract [or] sales order [under framework agreement (main framework agreement required)] (including relevant technical attachments) and 2) Receiving certificate of arrival of goods. The performance certification documents submitted by the bidder must at least reflect the following contents: contract signing time, manufacturer name, goods name, project name, supply quantity, specifications and models (caliber and pound class), arrival and acceptance materials. If the performance of the peak loading station is provided, the bidder shall also provide the peak loading station (meet GB51156-2015 LNG receiving station engineering design specification 2.0.2 LNG Receiving Station: The certification materials of the elements of receiving, storing, gasification and exporting liquefied natural gas by ship shall be A/Vailable through the official websites of the National Development and Reform Commission, the provincial development and Reform Commission, the government website, the project owner's official website and other official websites, and shall be provided in the form of screenshots stamped with the official seal. Failure to submit performance documentation, or the performance documentation provided does not reflect the above information, shall be regarded as invalid performance.（4）其他要求及证明文件Other requirements and supporting documents 投标人应提供阀门制造商以下有效认证证书复印件，所有证书认证的制造商名称应与其所提供业绩的制造商、此次投标货物的制造商一致。The bidder shall provide copies of the type certifications of the manufacturer when bidding. And the name of the certificates shall be the same with the manufacture of References and the manufacture of the bidding Goods. A. 投标产品制造商应具有国际或国内认证机构颁发的覆盖投标产品范围【阀门类型（球阀）、口径及磅级】的 API607 或 API6FA 或 ISO10497 或同等标准的防火证书，并附相应的测试报告。A. The bidding product manufacturer shall hA/Ve a fire prevention certificate issued by an international or domestic certification agency covering the scope of the bidding product [valve type (ball valve), caliber and pound class], which is API607 or API6FA or ISO10497 or BS EN 12266 or equivalent standards, and shall attach corresponding test reports. B. 阀门必须具备可靠的外密封性能，应至少达到 ISO 15848-1 的要求。投标产品制造商应具有覆盖本次招标产品范围【阀门类型（球阀）、温度、口径及磅级】的 ISO 15848 PART 1 证书，并附相应的测试报告。B. The valves must hA/Ve a reliable external seal performance and should meet at least the requirements of ISO 15848-1. The manufacturer of the bid product shall hA/Ve an ISO 15848 PART 1 certificate covering the scope of this tender [valve type (ball valve), temperature, caliber and pound class], and attach the corresponding test report.是否接受联合体投标:不接受未领购招标文件是否可以参加投标:不可以4、
未曾在中国电力招标采购网（www.dlztb.com）上注册会员的单位应先注册。登录成功后根据招标公告的相说明下载投标文件！

项目 联系人：李杨  
咨询电话：010-51957458 
传真：010-51957412 
手机：13683233285 
QQ:1211306049 
微信：Li13683233285 邮箱：1211306049@qq.com

备注：欲购买招标文件的潜在投标人,注册网站并缴纳因特网技术服务费后，查看项目业主，招标公告，中标公示等，并下载资格预审范围，资质要求，招标清单，报名申请表等。为保证您能够顺利投标，具体要求及购买标书操作流程按公告详细内容为准，以招标业主的解答为准本。

编辑：chinabidding.co